Shartak's R53 Hobo no more

12799 Views 89 Replies 15 Participants Last post by Shartak, 2 d ago

Shartak

Discussion Starter · May 12, 2017 (Edited)

2005 Facelift R53 - Jet black, Shwartz II 668 - White roof
Bought in december 2015 with 75K miles, almost 90K now.
Daily car, does only fast road and sometime autobahn (leaving close to germany)
Planning to Track it one day, when I'll get an other car to comute to work.

I feel like posting in the project section, rather that in the presentation.
Since summer is comming, I'm going to work on the car more often.

Things in BOLD are what I'm looking to buy, so PM me !
list of Mods I already have :

- chrono-pack
- KMT Reduced pulley 15%
- BMC CDA airbox (gone)
- D2 racing coilovers
- Alta V2 adjustable endlinks (front)
- Adjustable endlinks from Ebay (rear)
- MSD coilpack
- Magnecor KV85
- DENSO iridium
- JCW R53 Brakes
- Front upper strut brace
- Milltek non res catback

aesthetic:

- complete chrome black-out
- JCW Grills
- Japan Racing JR3 wheels in 16x7 ET40

List fo mods I'm planning to do :

- Hobo Airbox
- Upgraded intercooler
- Manifold + Tomcat
- Silicone hoses
- Bigger injectors (to be done)
- Catcam (to be done)
- ECU Tune (to be done)

aesthetic:

- JCW Aero kit
- JCW gearknob
- Dashboard wrap or something
- GP wing
- Joey Mod Front and rear (to be done)
- Black Roof and mirror cap (to be done)

See less See more

Reactions: 3

1 - 20 of 90 Posts

ElliotBate

· #2 · May 12, 2017

Looks good mate, got any more pictures?

Shartak

Discussion Starter · #3 · May 12, 2017

3

Yeh, but because I'm a dumbass I forgot to take pictures when I first got the car...

See less See more

ElliotBate

· #4 · May 12, 2017

Looks great! Get some spacers on the rear for sure :thumbup:

Reactions: 1

Shartak

Discussion Starter · #5 · May 12, 2017 (Edited)

ElliotBate said:
Looks great! Get some spacers on the rear for sure :thumbup:

Thanks !

Well maybe I could go spacers, but I don't know how much, like 5 to 10mm ?
And if I do, I'd probably go all around for the sake of the geometry.

ElliotBate

· #6 · May 12, 2017

Shartak said:
Thanks !

Well maybe I could go spacers, but I don't know how much, like 5 to 10mm ?
And if I do, I'd probably go all around for the sake of the geometry.

From the look of it I'd go minimum 10mm, see if you can get one cheap just to test it out first. Have you had it aligned?

I'd put the spacers on, lower it a little bit more and then have everything aligned - it'll help the handling and stop any uneven tyre wear

Shartak

Discussion Starter · #7 · May 12, 2017 (Edited)

2

Just a quick 10min mod. Rear MCs roof cap delete

Why? Because my GP wing is ready to fit tomorow :w00t:

See less See more

Reactions: 1

Shartak

Discussion Starter · #8 · May 15, 2017

Well... not everything goes everytime as planned, right ?
I'm gonna have to live with a non-winged with 2 holes R53 for 1 full week, the dude at the carshop wasn't available this week end :crying:

Reactions: 1

Shartak

Discussion Starter · #9 · May 15, 2017 (Edited)

7

I would like to thanks Astroboy and R53MINICOOPER for their tutorial on the HoboAirbox.
http://www.minitorque.com/forum/f275/hybrid-airbox-tenner-ish-30411/
http://www.minitorque.com/forum/f275/hobo-hybrid-airbox-part-2-a-32438/
http://www.minitorque.com/forum/f275/another-air-box-modification-thread-budget-116370/

Thanks dudes ! You rocks, the whine is real now !

See less See more

Reactions: 1

Dmcgroggan3

· #10 · May 17, 2017

Looking good so far man... Subscribed

Sent from my SM-G930T using Tapatalk

Shartak

Discussion Starter · #11 · May 17, 2017 (Edited)

Dmcgroggan3 said:
Looking good so far man... Subscribed

Sent from my SM-G930T using Tapatalk

Thanks dude !

I ordered some more parts on Ebay

-50£ JCW Gearknobcheaper than expected.

-Those ugly and cheap Door handle cover
that I'll spraypaint mat black

-And this Silicone intake hose to replace my craked one, people on Ebay says it's good.. Will see ( It comes from the same chinese compagnie as the other brand anyway..)

Astroboy

· #12 · May 17, 2017

Shartak said:
Thanks dude !

I ordered some more parts on Ebay

-50£ JCW Gearknobcheaper than expected.

-Those ugly and cheap Door handle cover
that I'll spraypaint mat black

-And this Silicone intake hose to replace my craked one, people on Ebay says it's good.. Will see ( It comes from the same chinese compagnie as the other brand anyway..)

My intercooler is going spare now. If you still want it pm me an offer. I don't think shipping to France would be very cheap though as it's quite heavy

Reactions: 1

Shartak

Discussion Starter · #13 · May 23, 2017

6

Packets recived !

This really is a better gear-knob. Do people use the gear scheme sticker ?

Also fitted the silicone hose, I'm going to do black and red engine bay, because red = more HP, right ?

Fitting was fine, nothing to cut, once the collars were tightened, I tryed to pull it out, but it didn't moved. So we good :laugh:

Today I'm going to paint my strut bar, does spraypaint works on aluminium ? does it last under the bonnet ? don't know if I should go black or red...

See less See more

rossR50

· #14 · May 23, 2017

Red!

Shartak

Discussion Starter · #15 · May 23, 2017 (Edited)

rossR50 said:
Red!

Yeah I may go red, I'll go see what BBQ paints there are at the store

On an other topic, while I was changing the intake hose I cleaned up the throttle valve ( why not right ? )
But now when I'm at low rev, and it opens "just a bit" I hear some sort of creaking or whistling I can't really tell.
This isn't much, It's just annoying, someone got an idea of the cause ? Did I fuck up something ?!

I know a lot of you guys are already over Rota grid V as it's "old" now on MT, but I reeeally love these wheels.
The problem I have is the fitment, I think 16x8 ET20 will stick out too much of the arch and I don't feel like messing around with ultra camber. Sadly

So I came across the Japan Racing JR12, witch surprisingly have much more ET flexibility. ( I don't see much Japan Racing wheels on MT, this must be more of a EU brand I guess ?)

And I think these JR12 16x8 ET33 should be just enough to fill the arch, and not stick out.
Since I know Rota Slipstream in 16x8 ET34 are the "purrfect" fitment, I guess 1mm wont change much right ?

Can someone confirm that ?

See less See more

Shartak

Discussion Starter · #16 · May 24, 2017 (Edited)

.

Shartak

Discussion Starter · #17 · Jun 6, 2017

3

So today I received a little gift !

It has been Cat approved, thanks Astroboy ! 10/10 wrapping btw
Now the fun part...installation...

See less See more

Reactions: 2

Shartak

Discussion Starter · #18 · Jun 12, 2017

It's in, it works, it's nice.

See less See more

Reactions: 1

Shartak

Discussion Starter · #19 · Jun 27, 2017

I finally made up my mind on where I want to go with the mini.
It's gonna be "3rd get bronze" or something like that..
Body is going to be black, details are going to be bronze and perfomance upgrades are going to be red.

Here is a list of what I'll be doing the future in that order :

chassis :
- lower strut brace
- upgraded Rear ARB
- Ajustable RCA
- Poly bush all around
- Stud & nuts conversion
- Rota grid V 16x8 ET20 Bronze
- Yoko AD08R 215/45 16

engine :
- bypass/throttle body check
- OBX/Janspeed manyfold
- Tomcat
-engine/sc check
- Catcam
-550CC injectors
- tune

Interior :
- 3 pieces dashboard gloss carbon wrap
- all ligt grey parts respray black
- some others small parts bronze
- 3 spoke wheel
- seats
- gauges and stuff

exterior :
- cc roof, light rings, miror caps, side vents ( with bronze "S"), petrol cap, door handle
- de badge
- Aero front/side bodykit
- upgraded scoop
- vented bonnet/side pannel

Feel free to comment guys, as I'm clearly not an expert and I'm willing to know if anything seems wrong in my plans !
cheers

See less See more

Reactions: 1

Shartak

Discussion Starter · #20 · Jun 28, 2017

2

Forgoth the Joey mod - Black with bronze Xeon ring

and I went ahead and did some paint already.
nothing amazing tho.

See less See more

Reactions: 3

1 - 20 of 90 Posts