MiniTorque.com banner
1 - 5 of 5 Posts

·
Premium Member
Joined
·
122 Posts
Discussion Starter · #1 ·
So, although I wasn't chasing numbers par se, feedback was that my supercharger might be best replaced with a teflon version, and the cam I had was not the best for my intended use..

Fast forward a week or so and I have fitted a teflon coated charger and a 469 catcam. Went back to 1320 yesterday to get it all mapped in.

Previous numbers were 187whp/217crank

Guesses after the new setup? ..

Closest gets an apple 🍎

Wheel Car Vehicle Tire Land vehicle
 

·
Premium Member
Joined
·
122 Posts
Discussion Starter · #17 ·
Well the winner is (and I've checked twice) is @Colonel Bogey with his guess of 205, just 3 shy of the actual. Here's an apple 🍎

You can see the before and after on this chart, more power and torque everywhere; a whopping 21hp gain. Not bad for a 20 year old motor.

Before 187whp/217crank
After 208whp/238crank

Rectangle Font Parallel Pattern Slope
 

·
Premium Member
Joined
·
122 Posts
Discussion Starter · #23 ·
Decent gains there. Makes me want to try a different cam in mine. Mine is running a 13.2% pulley but has a BVH too and mine made 238. Would be nice to be making a little more.
What cam do you have now? I think with the big valve head and a catcam you'll be gaining loads.
 
1 - 5 of 5 Posts
Top