MiniTorque.com banner

221 - 235 of 235 Posts

·
Premium Member
Joined
·
2,006 Posts
Looking good, love the chunky tyre look!

I've used these spray on products to protect my white wheels from XP8 dust:



Very easy to use. There are probably other similar products too that work the same.
 

·
Hobo Member
Joined
·
450 Posts
Discussion Starter · #222 ·
Thanks @JKo ! I had some coating on the white OZ but in my opinion it did not do it’s job well, unfortunately. I’ll check both you linked, let’s see what I end up buying.
 

·
Premium Member
Joined
·
2,006 Posts
In my experience those hold up for 2-4 weeks, depending on weather, track time and amount of car washes... so at least once a month I use some Bilt Hamber Auto-Wheel while washing the car, and then re-apply the protective stuff.

One thing though... they need to be applied on a dry surface, and then need to be left to dry for an hour (IIRC). So ideally you'd need to have the car indoors while it dries, as what ever dirt lands on there will stick while it's wet.
 

·
Hobo Member
Joined
·
450 Posts
Discussion Starter · #224 ·
Mini came back home on Friday evening. Did not need to push it as it started after connecting the battery. On Saturday cleaned the K&N (as every spring), replaced the cabin filter and installed a hobo ebay special coolant tank with a different cap that should hold the pressure, we will see how it works out.
Today finally put the "new" wheel on and I have to say that in my opinion it looks great, way better than with the bronze wheels. On the front had to use some 5mm spacers to clear the strut with the 215/45.

And the most important mod came from @Astroboy 😎
 

·
Hobo Member
Joined
·
450 Posts
Discussion Starter · #226 ·
The stickers look great. From far looks like a fake checkmate but when you get closer you see that it’s an original shitbox edition 😁
 

·
Hobo Member
Joined
·
450 Posts
Discussion Starter · #229 ·
Managed to source locally some original OZ caps. The place that sells loads of OZ wheels around here did not have them in stock.
D84E6394-E1DC-4FD1-84EF-A550E5524FC7.jpeg

Since yesterday the R53 is oficially a 2 seater so will be taking the belts out. Also have some time booked for tomorrow on a lift to do some maintenance and other minor stuff. Will try to post couple of pics and a list of things done.
 

·
Hobo Member
Joined
·
450 Posts
Discussion Starter · #231 ·
Yesterday had few hours booked on the lift and a long list of things to do but not everything was done. I'm less and less motivated to do things on this thing. @DTR was there to give me a hand and also @tcbw made an appearance (y)
Ended up replacing the gearbox oil, SC belt, installed the Carbotech XP8 pads just to notice that I need some new slider pins, installed some Powerflex exhaust mounts and put the decat on. Now it sounds like shit so will have to get the tomcat redone asap.

And to thank for all the work done, in the evening the shitbox greeted me with a "positive terminal isolation 1" code which triggered the airbag light. Have to love this thing. And also the daily broke down yesterday...
 

·
Hobo Member
Joined
·
450 Posts
Discussion Starter · #233 ·
Tired of the fart can rattle, drone and bloody smell from the decat, going to get the current tomcat redone with 2,5 pipe and new flanges this Thursday. Cant stand driving the shitbox, prefer to take the train to work as it is now.
 

·
Hobo Member
Joined
·
450 Posts
Discussion Starter · #235 ·
Let's see how it goes. Still plenty of stuff to do and to install. Hopefully wil get some of them done before Alastaro at the end of month.
 
221 - 235 of 235 Posts
Top