decoking manually

1101 Views 2 Replies 3 Participants Last post by  edwardtobia
removing carbon buildup manually

Is there a guide on how to removing carbon manually from the valves and everything that has carbon buildup in the R56 engine? When i say manually i mean without using a carbon blaster machine or sea foam or whatever, but to open up the engine and clean it all up!
1 - 3 of 3 Posts
Remove the head, remove the valves and get busy scraping the crap off.

Refit valves and head.

Unless you can get the inlet off and get a wire brush in there.
  • Like
Reactions: 1
Do not use a wire brush...
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.