MiniTorque.com banner

1 - 3 of 3 Posts

·
Registered
Joined
·
269 Posts
Discussion Starter #1
Morning all. So I've picked up this vgate OBD2 Bluetooth connector to start logging data to send back to RPM but I'm struggling with the vgate app to be able to share the downloads and or open them in excel or Google sheets etc.

So my question is what do you guys use to data log app wise.

TIA.

Geoff.
101783
 

·
Premium Member
Joined
·
326 Posts
I use the BlueDriver app but it may only work with the BlueDriver OBD dongle. It outputs the data as a CSV file and you can share it with Dropbox or Google drive. I upload it to datazap.me | Fast, Free, Interactive Datalogs for analysis and it gives you interactive charts that you can work with. I usually log rpm, boost pressure, and lambda as a minimum. If you're using the stock ECU then be aware that the overboost function will add around 2.5psi to whatever you set it to when it's active and it doesn't seem very easy to switch off permanently.

Sent from my SM-G965F using Tapatalk
 
1 - 3 of 3 Posts
Top